Resetting the maintenance-kit counter
After a maintenance kit is installed, the maintenance-kit counter must be reset. Use the following
procedure to reset the maintenance-kit counter.
1. Turn the printer power off.
2. Hold down the SELECT ( ) button, and then turn on the printer power. Continue holding
down the SELECT ( ) button until all three printer control-panel lights flash once and then
remain on. This might take up to 10 seconds.
3. Press the UP ARROW ( ) button to scroll to NEW MAINTENANCE KIT.
4. Press the SELECT ( ) button to reset the maintenance-kit counter.
Note Perform this procedure only after a maintenance kit has been installed. Do not use this procedure
to clear the PERFORM PRINTER MAINTENANCE message temporarily.
After a maintenance kit is installed, the maintenance-kit counter must be reset. Use the following
procedure to reset the maintenance-kit counter.
1. Turn the printer power off.
2. Hold down the SELECT ( ) button, and then turn on the printer power. Continue holding
down the SELECT ( ) button until all three printer control-panel lights flash once and then
remain on. This might take up to 10 seconds.
3. Press the UP ARROW ( ) button to scroll to NEW MAINTENANCE KIT.
4. Press the SELECT ( ) button to reset the maintenance-kit counter.
Note Perform this procedure only after a maintenance kit has been installed. Do not use this procedure
to clear the PERFORM PRINTER MAINTENANCE message temporarily.
