.jpg)
Old:
New:
If your printer's printhead is really clogged, our cleaning kit from Dr. Inkjet can be the last resort to get the good piece to print again.
This is how it works Dr. Inkjet cleaning kit:
First remove the printhead from the printer:
Switch on the printer and lift the lid so that the printer moves to the cartridge replacement position. Then pull the power plug and push the printhead correctly in the middle. Now the cartridges are removed - on some models there is a flap (CD drawer) in front of it, this is folded down and the drawer where the print head is located is pulled back. The printhead can now be removed.
After the printhead has been prepared as described in the enclosed operating instructions - the printhead cleaner is cleaned using the Dr. Inkjet vacuum tool flushed through the printhead. - See the video - This makes the ink channel really really clean!
Make the printhead nice and dry again and insert it again. Now slide the drawer back in, insert the cartridges and power up the printer again. That's it.
Scope of delivery:
- 2x Dr. Inkjet vacuum tool
- 100ml Dr. Inkjet printhead cleaner
- detailed illustrated instruction Manual
You can find our printhead cleaning kit here
Tools required for this: (not included in delivery) 1x tweezers, 1x bowl slightly larger than the print head and a large kitchen roll
Our cleaning set is not suitable for bringing print heads back to printing where the electronics are already broken - however, after using the Dr. Inkjet vacuum tools whether the print head has any other damage - than a blockage!
Compatibel to Printer
PIXMA
Printheadclean for IP7260
Printheadclean for MG5560
Printheadclean for MG6360
Printheadclean for MG6460
Printheadclean for MG7160
Printheadclean for MX726
Printheadclean for MX926
